Leading 10 typical forklift crashes ， forklift procedure need to pay attention to these issues ！.
Leading 10 typical forklift crashes ， forklift procedure need to pay attention to these issues ！.
Blog Article
Don't take too lightly the forklift at the office. If the procedure is not good, there will certainly be severe mishaps in mins, and there are several crashes entailing forklifts.
Case 1: The forklift freight blocked the vehicle driver's sight, and the individual in front might not be located, leading to a rolling mishap.
Situation 2: In order to keep the equilibrium of the forklift when raising heavy goods, the workers used their body weight as the counterweight, which almost created casualties.
Case 3: The width of the forklift freight surpasses the permitted size of the course and holds on the roadside rack, which nearly causes an accident.
Instance 4: Forklift is speeding up and rolls over during a turn.
Case 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not see the forklift.
Instance 6: The forklift lifts the workers unlawfully, the forklift chauffeur does not use the safety belt, the forklift lifter drops and the chauffeur is crushed when the forklift rolls over.
Case 7: The forklift driver did not use a seat belt and dropped from the automobile when it surrendered and was squashed.
Forklift operation ought to take note of these issues ：.
Beginning.
1. Prior to starting, observe the environments, and after confirming that there are no barriers that hinder the security of driving, honk the horn initially and after that begin.
2. For vehicles with hydraulic (air pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale need to be safe prior to beginning.
3. When the forklift begins with a load, the chauffeur ought to initially confirm that the lots is stable and trustworthy.
4. The start has to be slow-moving and consistent.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the pole must be slanted backwards. .
2. Do not raise the fork expensive when driving. When going into and leaving the work website or while driving, beware that there will be no obstacles overhead. When the lots is traveling, the fork should not be increased expensive, which will influence the stability of the forklift. .
3. After discharging, the fork must be decreased to the typical driving setting prior to driving. .
4. When turning, if there are pedestrians or cars close by, the driving signal should be released first. High-speed doglegs are banned. High-speed sharp turns will certainly create the vehicle to lose side security and tip over. .
5. When the forklift is downhill, it is strictly prohibited to turn off the fire and slide, and it is restricted to brake instantly while driving with tons unless there are unique situations.
6. When the forklift is running, it should comply with the web traffic rules in the manufacturing facility and have to maintain a particular safety range from the vehicle in front. .
7. When the forklift is running, the load should remain in the lowest position that does not impede the driving, and the gantry must be effectively tilted back. The tons will not be elevated other than when piling or filling. .
8. The height of the load need to not block the chauffeur's view. In unique scenarios, when the product impacts the forward vision, drive at a reduced speed when turning around.
9. It is prohibited to turn on the ramp, neither to drive throughout the ramp. .
10. The safe driving rate of the forklift in the factory location is 5 km/h, and it must drive securely at a reduced speed when entering the manufacturing workshop area. .
11. When the forklift is lifted, raised or driven, it is forbidden for workers to base on the fork to hold items and play a stabilizing function. .
12. If troubles are discovered, they will certainly be fixed and reported in a timely manner, and they will certainly never operate with diseases or conceal them.
loading and dumping.
1. When fork-loading products, the distance in between both forks must be readjusted as needed to make the load of the two forks well balanced and not skewed, and one side of the thing need to protest the shelf. .
2. It is prohibited to deal with a single fork or make use of a fork top or pull. In special situations, security warning signs have to be set up to advise surrounding pedestrians. .
3. In the process of loading and discharging things, the forklift must be braked with the brake. .
4. The rate of the car should be slow and steady. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt people. .
5. When making use of a fork to fork the goods, the fork Electric Forklift Truck for Warehouse ought to be as deep as possible under the load, and it needs to be noted that the fork pointer ought to not touch various other goods or items. The lots needs to be stabilized with very little back tilt of the gantry so that the tons does not slide backwards. Electric Forklift Truck for Warehouse The mast can be tilted onward slightly when the lots is lowered to enable easy positioning of the lots and removal of the forks. .
6. It is restricted to fork products at broadband and collide with difficult items with the fork head. .
7. When the forklift is functioning, it is forbidden for people to loaf the fork, so regarding prevent the collapse of the goods and harm individuals. .
8. Overloading is banned, and it is restricted to make use of forks to raise personnel to participate in high-altitude procedures to prevent high-altitude dropping accidents. .
9. It is not allowed to utilize the brake inertia to slip, put, round or roll things. .
10. It is not enabled to utilize forks to select, transform pallet unload.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you need to discharge the goods or reduced the fork framework.
2. Draw the parking brake manage to dead or depress the emergency brake switch.
3. The engine is turned off and the power is cut off. (Except for unique scenarios, such as the driver does not leave the vehicle's view and does not go beyond 1 min).
4. Eliminate the trick. .
Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance ought to be inspected, and fuel, lubing oil and air conditioning water must be added.
2. Check the safety and security efficiency of beginning, running and braking.
3. Examine whether the lights and horn signals are full and reliable.
4. During the procedure of the forklift, check whether the pressure and temperature level are regular.
5. After the forklift is running, the outside leakage should additionally be checked and the seals must be replaced in time.
Forklift Safety Operation Specifications.
1. You must check before leaving the automobile;.
2. When you come across somebody in front of you during driving, you ought to send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the nadir of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The turning must not be too sharp to prevent the propensity of "free switching";.
6. Adding and down the slope should be slow and uniform, and no turning on the incline is allowed.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle needs to be driven backwards when going downhill;.
8. When the forklift personnel bring the goods and move forward, if they come across large or hefty products and go to the chauffeur's line of sight, they ought to take the reversing exercise
.
The "Eight Prohibitions" ought to be adhered to in the procedure.
1. Single fork procedure is not enabled.
2. It is not allowed to lift the goods for cross country driving.
3. It is not permitted to pick up the goods by passing on the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not enabled to utilize inertia pressure to pick up the goods.
6. It is not permitted to make use of stopping pressure to exile round or easy-to-roll objects.
7. It is not allowed to bring individuals to service the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is elevated.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the following problems.
1. Curves, slim roadways, train crossings;.
2. Sections with a longitudinal incline higher than 5%.
3. When there is an obstacle on one side of the roadway, the contrary side of the area with the very same length as the barrier must be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844